Change a Propane Tank
Forklifts fueled by propane are common inside warehouse settings. These forklifts have a propane mount located at the rear of the operator. These tanks need to be replaced periodically because they have limited lifespans. Operators of forklifts must utilize care when handling propane tanks. Compressed gases are really hazardous, particularly since the gas is flammable. Always utilize caution when removing and replacing propane tank to avoid being injured.
1 To change a propane tank, first stop the lift truck and leave the engine running, and turn the valve on the tank off. Let the forklift run until the engine dies. This procedure burns the gas off inside the transfer hose that connects the engine and the tank. Prior to taking the second steps, put on the proper safety equipment, like insulated gloves made of either leather or neoprene. It is really essential for you to protect your skin from touching the compressed gas, which is very cold.
2 The tank hose needs to be disconnected, followed by removing the tank from its holding straps. When putting in a new tank, reattach the holding straps and reattach the hose at the valve of the tank by tightening the nut.
3 You can check for leaks by applying soapy water to the valve and slightly opening it. Leaking gas would cause bubbles to foam around the value. If this occurs, check the connection hose at the nut and the valve area. Re-tighten the connecting nut if you detect any leaks around the area of the valve, and after that perform the leak inspection procedure again. Persistent leaks mean that both the connecting hose and nut will need to be replaced. Nevertheless, if replacing the hose and nut still does not stop the leak, the tank will need to be replaced.
4 Lastly, open the valve all the way to allow the gas to fill the connecting hose. Then you can start the lift truck and continue working.