It is really vital to use extra care when utilizing a rough terrain scissor lift. Operators should be fully aware of the surrounding environment. Extended booms on the machinery act as levers from the drive units center. Like for instance, a 6 inch bump can lead to a 3 foot bounce when the operator is at the driver controls. Consider all other traffic nearby, because they may not be aware that you are moving. Plan your assent cautiously. Park the boom lift on a flat surface which has no mud or water. These areas cover deep potholes which could be probably cause the occupants to fall if the tires fell into the holes. If provided, use all of the outriggers, fully extended. Be sure to just use approved wooden chalk blocks.
Many lifts operate from a metal platform on the end of the boom. The long booms act as levers from the drive unit's center. A 6-inch bump could result in a 3-foot bounce while you are at the driver controls. Be aware of all other traffic. They may not be aware that you are moving. Plan your assent. Park the boom lift on a flat surface free of any water or mud. These areas could conceal deep potholes wherein the lift tires could fall, tipping the occupants. Extend all outriggers, if provided, to the full extension position. Place just approved wooden chalk blocks under the outrigger pads to prevent the unit from moving.
Overhead power lines are a serious hazard for lift drivers no matter what lift is being utilized. Like for example, if the driver of the platform is not being aware, or if the platform is being controlled by ground personnel which is not able to correctly access proximity to wiring and therefore, either the platform itself or the worker can be easily brought into contact with electrical wires. The worker might be electrocuted unfortunately unless correctly insulated.