Forklifts are vehicles normally found in factories, warehouses and other work sites where it is necessary to move heavy materials from one location to another. The mast is the mechanism situated on the front of the forklift that hydraulically lowers and raises the load. The "cat" is the protected area where the forklift operator sits.
Forklifts can carry loads which weigh between one to five tons. Several types could be used to lift shipping containers and much heavier loads.
Forklift tires must be checked and maintained regularly. The types of tires on various forklifts vary according to factors like for instance frequency of use, weight of the loads and ground surfaces. Every operator of a forklift must have access to a forklift jack, tire press and replacement tires.
Tire Maintenance Instructions
Carry out tire inspections regularly. Watch for signs of damage and wear to the tires. If the wear on the tire exceeds 40%, it has to be replaced.
When buying tires, make certain that you are purchasing the right type - polyurethane, solid or pneumatic.
When the tire needs replacing, position the forklift jack under the tire and raise the forklift high enough that you could change the tires easily.
To remove the damaged tire, pull the tire from the rim utilizing the tire press. Install the new tire and secure it well. If you are changing more than one tire and you only have one jack, lower the forklift, then reposition the jack at the next tire.
On-site tire repair could be performed by a repair company. If the tire is too big for both in-house and mobile tire presses, the damaged tire should be transported to a shop which has a stationary tire press.